Full Face Mask (Non-Vented) AirFit F20 NV Small | ResMed

Full Face Mask (Non-Vented) AirFit F20 NV Small | ResMed

Q: Which size should I choose?

The AirFit F20 NV comes in Small, Medium and Large. The manufacturer sources we have do not give a sizing guide; ask us on +30 2311 286 262 before you order.

Q: Will it fit my device?

According to the manufacturer, the AirFit F20 NV is compatible with Astral ventilators and is used with an external exhalation device. Tell us which device you have and ask us on +30 2311 286 262.

Q: How is it different from AirFit F20?

The AirFit F20 NV has no vent or AAV; it is used with an external exhalation device, with the blue NV elbow. The elbows can be swapped so the same mask is vented or non-vented, according to the manufacturer.

Q: How often is it replaced?

The manufacturer gives no fixed replacement interval for this item. If any part shows visible wear (cracks, discoloration, tears, etc.), it should be replaced, according to the manufacturer's instructions. For availability, ask us on +30 2311 286 262.

Q: How is it cleaned?

Daily, after each use: take the mask apart; rinse the frame, elbow and cushion under running water and clean them with a soft brush; soak them in warm water with mild liquid detergent for up to ten minutes, shake, brush the frame joints, rinse and air dry out of direct sunlight. Weekly, hand wash the headgear. No dishwasher or washing machine. Between patients, reprocess according to ResMed's instructions. If any part shows visible wear (cracks, discoloration, tears, etc.), it should be replaced, according to the manufacturer's instructions.

Q: What warranty does it have?

The manufacturer sources we have do not give a warranty period for this item; ask us before you order. Your statutory rights always apply. Contact us about any problem and we pass it on to the manufacturer.

by Resmed

CODE: RESP1604 | ΕΑΝ: - | Part No: 64020

AirFit F20 NV non-vented full face NIV mask — ResMed, size Small
Non-vented (NV) — for non-invasive ventilation with Astral
Up to 40 cmH2O — seal also in bilevel, according to the manufacturer
Blue NV elbow — swaps with a vented elbow
Manufacturer's instructions — clean and care as ResMed specifies

Buy now, pay later in 3 interest-free installments for purchases over €35. Read more.

Ships in 1-3 days

Size

L S M

AirFit F20 NV non-vented full face NIV mask — ResMed, size Small
Non-vented (NV) — for non-invasive ventilation with Astral
Up to 40 cmH2O — seal also in bilevel, according to the manufacturer
Blue NV elbow — swaps with a vented elbow
Manufacturer's instructions — clean and care as ResMed specifies

Description

The ResMed AirFit F20 NV is a non-vented full face mask for non-invasive ventilation, with the features of AirFit F20; according to the manufacturer it is compatible with Astral ventilators and the blue NV elbow identifies the non-vented setup. Size Small.

Who it is for

For patients over 30 kg: who need ventilatory assistance that is not life support, according to the manufacturer; as directed by a doctor and under the supervision of trained staff.

Ways to use it

Fit: easy to fit to many face shapes; the seal withstands high pressure (up to 40 cmH2O) and bilevel, according to the manufacturer.
Interchangeable elbow: elbows can be swapped so the same mask is vented or non-vented.
No forehead contact: with plush headgear for softness and stability.
Blue NV elbow: identifies the non-vented setup.

Will it fit? Measure before you order

Size: this page is for size Small; the mask also comes in Medium and Large.

Not sure? Call us on +30 2311 286 262.

Basic safe-use tips

Always follow the manufacturer’s instructions for use. For example:

Use the mask only with the device and pressure settings your doctor has set.
Clean the mask and replace its parts as the manufacturer's instructions for use say.
Before each use, check that the cushion, frame and headgear are not damaged.
The NV mask is used only with an external exhalation device (it has no AAV or vent) and under the supervision of trained staff, according to the user guide; it is not for patients who depend on life support.
It contains magnets. The manufacturer gives warnings and contraindications for the magnets in the instructions for use; read them before use and, for any question, ask your doctor.

What is included

Mask system: non-vented elbow, frame with magnetic clips, cushion, headgear

Specifications

Type	Non-vented full face NIV mask
Model	AirFit F20 NV (ResMed)
Size	Small
Pressure range	3–40 cmH2O
Resistance	0.2 cmH2O at 50 L/min; 0.6 cmH2O at 100 L/min
Patient weight	> 30 kg
Magnets	yes, in the frame and the lower headgear straps (< 400 mT)
Dead space	206 mL
Dimensions (H × W × D)	131 × 159 × 158 mm (fully assembled with elbow, without headgear)
Weight	107 g (system with headgear, per the user guide)
Contents	NV elbow, frame with magnetic clips, cushion, headgear
Code	RESP1604

Compliance: manufacturer and CE marking

Manufacturer: ResMed Pty Ltd, Australia (EU authorised representative: ResMed SAS)

Medical device, Class IIa, CE marked under Regulation (EU) 2017/745.

Printed instructions for use in Greek are in the box.

For any problem, contact us or write to [email protected]; we pass it on to the manufacturer.

This page does not replace the manufacturer's instructions for use or the advice of your doctor or nurse.

Additional Information

Manufacturer

Resmed

Frequently asked questions

The AirFit F20 NV comes in Small, Medium and Large. The manufacturer sources we have do not give a sizing guide; ask us on +30 2311 286 262 before you order.

According to the manufacturer, the AirFit F20 NV is compatible with Astral ventilators and is used with an external exhalation device. Tell us which device you have and ask us on +30 2311 286 262.

The AirFit F20 NV has no vent or AAV; it is used with an external exhalation device, with the blue NV elbow. The elbows can be swapped so the same mask is vented or non-vented, according to the manufacturer.

The manufacturer gives no fixed replacement interval for this item. If any part shows visible wear (cracks, discoloration, tears, etc.), it should be replaced, according to the manufacturer's instructions. For availability, ask us on +30 2311 286 262.

Daily, after each use: take the mask apart; rinse the frame, elbow and cushion under running water and clean them with a soft brush; soak them in warm water with mild liquid detergent for up to ten minutes, shake, brush the frame joints, rinse and air dry out of direct sunlight. Weekly, hand wash the headgear. No dishwasher or washing machine. Between patients, reprocess according to ResMed's instructions. If any part shows visible wear (cracks, discoloration, tears, etc.), it should be replaced, according to the manufacturer's instructions.

The manufacturer sources we have do not give a warranty period for this item; ask us before you order. Your statutory rights always apply. Contact us about any problem and we pass it on to the manufacturer.

Cancel

Price

109,90€

88,63€ +21,27€ VAT

Quantity

Buy it 104,41€ with Traumacare PLUS

Ships in 1-3 days

Size

L S M

Full Face Mask (Non-Vented) AirFit F20 NV Small | ResMed

Size

Who it is for

Ways to use it

Will it fit? Measure before you order

Basic safe-use tips

What is included

Specifications

Additional Information

Related products

Frequently asked questions

Quantity

Size

Quantity

Combine your purchases with:

Welcome to Traumacare

We ask for your permission to use your personal data.

Quantity

Combine your purchases with: