It fits the Fisher & Paykel Evora nasal mask, in all sizes (Small, Medium, Large, Wide), according to the manufacturer. If you are not sure which mask model you have, ask us on +30 2311 286 262.

How often is it replaced?

According to the manufacturer, for single patient reuse the Evora mask is replaced no later than 12 months after the date of first use.

According to the manufacturer: after each use, wash the seal, swivel, frame and tube; after 7 days of use, wash the complete headgear, including the top strap and back strap. Hand-wash in soap dissolved in lukewarm water, do not soak for more than 10 minutes, rinse and dry out of direct sunlight. No alcohol, anti-bacterial agents, antiseptic, bleach, chlorine or moisturiser, no dishwasher, do not iron the headgear, and do not pull the tube from the frame (it is permanently connected).

What warranty does it have?

The manufacturer does not give a separate warranty period for this item; ask us on +30 2311 286 262 before you order. Your statutory rights always apply. Contact us about any problem and we pass it on to the manufacturer.

CPAP Mask Frame with Tube Evora | Fisher & Paykel

CPAP Mask Frame with Tube Evora | Fisher & Paykel

by Fisher & Paykel

CODE: RESP1447 | ΕΑΝ: - | Part No: 400EVO171

Frame with tube — Fisher & Paykel Evora (compact nasal mask)
Dynamic Support — the stability wings work with the floating seal to allow freedom of movement
Radial air-flow — laser-drilled exhaust holes designed to minimise noise and draft
Includes — frame and tube

Buy now, pay later in 3 interest-free installments for purchases over €35. Read more.

Ships in 1-3 days

Frame with tube — Fisher & Paykel Evora (compact nasal mask)
Dynamic Support — the stability wings work with the floating seal to allow freedom of movement
Radial air-flow — laser-drilled exhaust holes designed to minimise noise and draft
Includes — frame and tube

Description

Frame with tube for the Fisher & Paykel Evora nasal CPAP mask. The tube is permanently connected to the frame; according to the manufacturer, the laser-drilled exhaust holes are designed to minimise noise and draft.

Ways to use it

Dynamic Support: the stability wings work with the floating seal to allow freedom of movement, according to the manufacturer.
Radial air-flow: laser-drilled exhaust holes designed to minimise noise and draft.

What it fits

Compatibility: it fits the Fisher & Paykel Evora nasal mask, in all sizes (Small, Medium, Large, Wide), according to the manufacturer.

Not sure? Call us on +30 2311 286 262.

Basic safe-use tips

Always follow the manufacturer’s instructions for use. For example:

Before each use, check that the part has no wear, tears or changes; if it has, replace it.
Clean and reassemble the mask as the manufacturer's instructions for use say.
Use the mask only with the device and settings your doctor has set.

What is included

Frame
Tube, permanently connected to the frame

Specifications

Type	Frame with tube
For the mask	Fisher & Paykel Evora (compact nasal mask)
Mask operating pressure	4–25 cmH2O
Operating temperature	5–40 °C
Mask sound pressure level	18.8 dBA, according to the manufacturer
Mask intended patients	adults from 30 kg, according to the manufacturer
Latex	not made with natural rubber latex, according to the manufacturer
Manufacturer	Fisher & Paykel Healthcare Limited, New Zealand
Compliance details	on request