It fits the Fisher & Paykel Eson nasal mask and the Simplus full face mask, according to the manufacturer (shared spare part). If you are not sure which mask model you have, ask us on +30 2311 286 262.

How often is it replaced?

The manufacturer does not give a replacement interval for this item; follow the instructions for use and ask us on +30 2311 286 262.

According to the manufacturer: after each use, wash the mask (excluding the headgear) in soap dissolved in lukewarm water, do not soak it for more than 10 minutes, rinse it thoroughly with fresh water and dry it out of direct sunlight. After 7 days of use, hand-wash the headgear the same way. The diffuser is not washed. Do not use products containing alcohol, anti-bacterial agents, antiseptic, bleach, chlorine or moisturiser, no dishwasher, and do not store it in direct sunlight.

What warranty does it have?

The manufacturer does not give a separate warranty period for this item; ask us on +30 2311 286 262 before you order. Your statutory rights always apply. Contact us about any problem and we pass it on to the manufacturer.

CPAP Mask Swivel Connector Eson | Fisher & Paykel

CPAP Mask Swivel Connector Eson | Fisher & Paykel

by Fisher & Paykel

CODE: RESP1398 | ΕΑΝ: - | Part No: 400HC570

Swivel connector — Fisher & Paykel Eson (nasal mask)
Tube connection — the swivel connects the mask elbow to the CPAP tube and is pushed onto the elbow
Mask operating pressure — 4–25 cmH2O, according to the manufacturer

Buy now, pay later in 3 interest-free installments for purchases over €35. Read more.

Ships in 1-3 days

Swivel connector — Fisher & Paykel Eson (nasal mask)
Tube connection — the swivel connects the mask elbow to the CPAP tube and is pushed onto the elbow
Mask operating pressure — 4–25 cmH2O, according to the manufacturer

Description

Swivel connector for the Fisher & Paykel Eson nasal CPAP mask. It connects the mask elbow to the CPAP tube; it is a shared spare part of the Eson and the Simplus, according to the manufacturer.

Ways to use it

Tube connection: the swivel connects the mask elbow to the CPAP tube and is pushed onto the elbow, according to the manufacturer.

What it fits

Compatibility: it fits the Fisher & Paykel Eson nasal mask and the Simplus full face mask, according to the manufacturer (shared spare part).

Not sure? Call us on +30 2311 286 262.

Basic safe-use tips

Always follow the manufacturer’s instructions for use. For example:

Before each use, check that the part has no wear, tears or changes; if it has, replace it.
Clean and reassemble the mask as the manufacturer's instructions for use say.
Use the mask only with the device and settings your doctor has set.

Specifications

Type	Swivel connector
For the mask	Fisher & Paykel Eson (nasal mask)
Mask operating pressure	4–25 cmH2O
Simplus operating pressure	4–25 cmH2O
Manufacturer	Fisher & Paykel Healthcare Limited, New Zealand
Compliance details	on request

See also: CPAP accessories · Nasal CPAP masks · CPAP devices